Availability: Out of stock
Grill-free, whisper-quiet 12V fan with shock-absorbing FingerSafe™ blades, 2-speeds, lighter plug connection. Made in Canada.
Availability: Out of stock
Grill-free, whisper-quiet 12V fan with shock-absorbing FingerSafe™ blades, 2-speeds, lighter plug connection. Made in Canada.
The quiet and compact Ultimate provides airflow equal to much larger fans while drawing minimal power. The grill-free design allows for whisper-quiet operation, and shock-absorbing FingerSafe™ blades make the fan safe and easy to clean. The 747 Ultimate has a suction cup mount and a 6' cord to connect to a lighter plug for easy maneuverability. An optional clothespin-style clamp allows for additional positioning.
Powerful airflow keeps cabins cool.
Quickly readjust placement with a secure suction cup mount.
FingerSafe™ Blades are easy to clean.
Grill-free design allows greater airflow; no dust build-up.
Whisper quiet operation.
Weight (LBS) | 1.54 |
---|---|
UOM | EA |
UPC | 062503747431 |
CFM | 200 |
Product Color | White |
Power Supply (V) | 12 V |
Speed Settings | 2 |
Current Draw on Low | 0.28A |
Current Draw on High | 0.40A |
Airflow on Low | 150 CFM |
Airflow on High | 200 CFM |
Connection Type | Lighter Plug Adapter |
Limited Warranty | 1 Year |
Our marine fans are low-voltage fans that do not plug into the grid; therefore, they do not require CSA or UL certifications.
The part that you are referring to is a ferrite bead. The ferrite bead is required to meet Electromagnetic immunity and emission compliance requirements by the Canadian Standards Association (CSA) and must not be removed. Without this ferrite bead, other electronic devices near the fan may experience electromagnetic interference when operating. This will vary with the specific equipment and proximity to the fan. You can cut the heat shrink tubing off to eliminate some of the bulk surrounding the ferrite. Arrange the wires so that two are on the side and one is on the opposite side. This will allow it to lay flatter.
Yes. Please ensure that the smooth cord wire (with writing) is attached to the negative (ground) wire and that the ribbed cord wire is connected to the positive (red) wire.
The body of each fan is made from plastic. Depending on the fan, the plastic used may be FR ABS or ASA. The blades are made of polyethylene.
No. Our fans are not 'ignition proof' certified or tested. In an engine room, there is always the risk of having fuel and hydrocarbon fumes. For this reason, we do not recommend our fans be used in this environment. Our fans use a brushed motor, with an expected brush life of 5000 to 7500 hours. Operating the fans 24-hours will wear the brushes in a shorter time frame than the normally expected duty cycle.
Yes! The 747/757 Ultimate Fans, 817 Kona or 7482 Maestro Fan would be suitable.
Our 747-model fan is manufactured with a cigarette lighter adapter (plug). It also comes with a suction cup mount, in addition to the permanent mount, so it can be installed in various ways and applications.
Our 757-model fan is a direct wire unit and features a permanent mount.
Mounting clamps can be purchased as well.
We do have several replacement blades available for various units. You can purchase blades for the Ultimate 747 & 757 models on our website.
To install, pull the faulty blade off the motor shaft and push the new blade hub onto the motor shaft. Please leave a small space between the blade hub and the motor housing so the blade can spin freely.
The smooth wire is positive, and the ribbed wire is negative.