Availability: Out of stock
USD$134.99
Overview
Variable speed control 12V fan with light and mountable remote pendant. Made in Canada.
The Maestro fan builds on the popularity of the Bora fan with the addition of dual LED light and wired remote pendant control. A variable speed control allows boaters to find their perfect preferred airflow. The remote pendant can be surface or flush mounted up to 6 feet from the fan.
Mount the control to operate the fan from up to 6' away.
Handy white light provides enough light to move around.
Red evening light won't disturb sleepers, great for reading.
With you for the long haul: ultra-low power draw, 5000+ hr motor life.
- 130 CFM on high (221 m³/hr)
- Current draw on high: 0.28A
- Current draw on low: 0.15A
- LED area lighting with red night vision option
- Remote control mountable pendant
- Variable speed for perfect comfort levels
- Long life 5000+ hour motor with low power draw
- Direct wire
Product dimensions: 6.5" x 3.0" x 8.5" (165 mm x 76 mm x 216 mm)
| Weight (LBS) | 2.12 |
|---|---|
| UOM | EA |
| UPC | 062503748216 |
| CFM | 130 |
| Product Color | Black |
| Power Supply (V) | 12 V |
| Speed Settings | Variable |
| Current Draw on Low | 0.15A |
| Current Draw on High | 0.28A |
| Airflow on Low | 100 CFM |
| Airflow on High | 130 CFM |
| Connection Type | Direct Wire |
| Limited Warranty | 2 Year |
Write Your Own Review
1. Do your fans have a CSA or UL rating?
Our marine fans are low-voltage fans that do not plug into the grid; therefore, they do not require CSA or UL certifications.
2. What is the cylinder-shaped component of the cord?
The part that you are referring to is a ferrite bead. The ferrite bead is required to meet Electromagnetic immunity and emission compliance requirements by the Canadian Standards Association (CSA) and must not be removed. Without this ferrite bead, other electronic devices near the fan may experience electromagnetic interference when operating. This will vary with the specific equipment and proximity to the fan. You can cut the heat shrink tubing off to eliminate some of the bulk surrounding the ferrite. Arrange the wires so that two are on the side and one is on the opposite side. This will allow it to lay flatter.
3. What are your fans made of?
The body of each fan is made from plastic. Depending on the fan, the plastic used may be FR ABS or ASA. The blades are made of polyethylene.
4. Can your fans be used to ventilate my engine room, running for a minimum of 24 hours a day?
No. Our fans are not 'ignition proof' certified or tested. In an engine room, there is always the risk of having fuel and hydrocarbon fumes. For this reason, we do not recommend our fans be used in this environment. Our fans use a brushed motor, with an expected brush life of 5000 to 7500 hours. Operating the fans 24-hours will wear the brushes in a shorter time frame than the normally expected duty cycle.
5. Do you offer a fan that will turn on automatically if the power is cut off and restored? Which models offer this?
Yes! The 747/757 Ultimate Fans, 817 Kona or 7482 Maestro Fan would be suitable.
6. What are the operating specifications for the Maestro unit?
The Maestro unit operates on the following specifications.
Voltage: 12V
CFM;
Low: 100 CFM
High: 130 CFM
Current Draw
Low: 0.15A
High: 0.28A
Decibel Level: 30dBA- 47dBA
LED Current Draw:
White: 0.20A
Red: 0.15A
7. What are the dimensions of the Maestro Fan?
The approximate dimensions for the Maestro Fan are 6.5" W x 3" L x 8.5" H (165.1mm x 76.2mm x 215.9mm).
Product Manuals
Related Products
Check items to add to the cart or
